• I switched from roadrunner to att (isp) . When I run a speed test it shows my laptop running at 16mbs ,but my ps3 will only run at 6mbs. Also I bought a second ps3 for my boy so we can go online and play cod mw2 , but it will not let us join together. ATT has a router/modem combo called a 2wire and I don't know alot about changing settings. If you can, PLEASE HELP!!
  • Scott,

    Another member here (dmadman72) posted a good thread that explains how to hook up multiple PS3's at once. I can not find that thread, so I will re-post it here for you to look over:



    Courtesy of dmadman72

    This may seem scary to some but trust me it's easy.

    This is my set-up for my linksys wrt54gs router. This process should work on any router

    The first thing to do is access your router, Find Local network ( status is where I found it on my router)

    Next look for "start ip address. Mine is XXX.XXX.1.100. That left me XXX.XXX.1.2 to XXX.XXX.1.99 to use for a static ip.(DO NOT USE XXX.XXX.1.1 as that is your router.)

    Next turn on your PS3 and go to settings, network settings, internet connection settings.

    Next chose custom in the setting method.

    Wired or wireless? what ever you are set up for.

    Select the operation mode of the network device. Manual settings is what you want

    100BASE-TX Half-Duplex is what I choose

    IP address setting. Select manual.

    here is what I have for playstation 3 #1.

    IP Address, XXX.XXX.1.5
    Subnet Mask, 255.255.255.0
    Default router, XXX.XXX.1.1
    Primary DNS, XXX.XXX.1.1
    Secondary dns, 0.0.0.0

    here are my settings for playstation3 #2

    IP Address, XXX.XXX.1.6
    Subnet Mask, 255.255.255.0
    Default router, XXX.XXX.1.1
    Primary DNS, XXX.XXX.1.1
    Secondary dns, 0.0.0.0

    here are my settings for playstation3 #3

    IP Address, XXX.XXX.1.7
    Subnet Mask, 255.255.255.0
    Default router, XXX.XXX.1.1
    Primary DNS, XXX.XXX.1.1
    Secondary dns, 0.0.0.0

    the only thing that changes is the last number in the IP address.

    MTU, I chose manual just to make sure it was set at 1500.

    Proxy server, Do Not Use

    UPnP, I chose enable

    You will now come to a screen to that shows all the info you have input. Double check to make sure that everything looks good. Now press X to save settings

    Press X to test conection.

    you have just enabled your self to use all your ps3's on line.

    If in the event you get stuck you can all ways just go back and select Easy in the settings method. I will get you to where you were before you started. If you have any questions just ask away.